I started to get event id 1053 in the terminal servers logs. Use it! The cause was traced to an Anti-Virus/Firewall program (AVG 7.5 Server) running on the DC. x 5 Anonymous In my case, increasing the Kerberos Token size worked on my W2K3 standard server. have a peek at this web-site
If the problem persists, rejoin the domain with a slightly different computer name 0 Poblano OP Melman May 18, 2009 at 3:09 UTC Did that - no go DNS is correct and 10 other clients are all working correctly WRT group policy, etc. With the help of netstat -aon &netstat -anobcommands, you can get info of ports along with PIDs (Process IDs).I don't understand why you did not get any clue. There will be an option that allows you to team the ports.
If the user recently changed their password, the issue might disappear after allowing time for Active Directory replication to succeed. If so, delete it. I read somewhere its related to handle....
In my case i have an old 2 DCs network. Has anyone had a similar problem? read more... Windows Cannot Determine The User Or Computer Name Access Is Denied Removing the accounts referencing the old domain and running gpupdate, the error was gone.
The information in the 529 event contained the reason "Unknown user name or bad password", a logon type of 3, and the logon process and authentication process set to Kerberos. Event Id 1053 Group Policy ME244474 resolved the issue for us. The PC was not logging to the domain and I was not able to re-join the PC to the domain because the "Network ID" button under the "System Properties" computer name https://technet.microsoft.com/en-us/library/cc727337(v=ws.10).aspx The network configuration was correct but it was being used stand-alone and was not connected to a network.
I was able to fix this issue when I realized that my "wkssvc.dll" file, which normally resides in "C:\WINDOWS\system32" got mysteriously deleted. Windows Cannot Determine The User Or Computer Name. The System Detected A Possible Attempt I've tried deleting the zones on DC2, uninstalling the service and then reinstalling, recreating the zones. DHCP registers DNS.For testing purposes, I set DC2 to point to itself for primary DNS. We appreciate your feedback.
pcgeek86 Ars Tribunus Angusticlavius Registered: Jan 4, 2006Posts: 6616 Posted: Thu Oct 05, 2006 5:06 am quote:Originally posted by Triggerhappy:One sure sign if an F'd up DNS setup is if it https://community.spiceworks.com/topic/38164-error-1053-windows-cannot-determine-the-user-or-computer-name The security had to be loosened. Windows Cannot Determine The User Or Computer Name Not Enough Storage No go.Thanks though. · actions · 2006-Jan-28 11:08 pm · BillRolandPremium Memberjoin:2001-01-21Ocala, FL BillRoland Premium Member 2006-Jan-28 11:40 pm What (if any) changes have you made before this started? Event Id 1053 Error Code 1722 This could be caused by one or more of the following: a) Name Resolution failure on the current domain controller.
I turned off"Receive Side Window Scaling" in the Broadcom settings to restore full functionality. Check This Out x 5 Craig Curtis Error: "The specified user does not exist" (Error code 1317) -Verify the DNS Settings. Tangled Mess [VerizonFiOS] by anon244. Then stop logon service, flush DNS and register DNS again with ipconfig /registerdns". Windows Cannot Determine The User Or Computer Name 1326
See ME325356. The DC event viewer did not show any relevant information. A reboot fixed it. Source Group Policy processing aborted.
x 8 Alex Rogachevsky This error was showing up on our Windows XP clients; users were not able to authenticate in the 2003 AD domain. Windows Cannot Determine The Computer Name. (access Is Denied. ) Dyson vacuum ruining carpets or not good for carpet warranty [HomeImprovement] by HBuilder328226. Use Networking troubleshooting procedures to further diagnose the problem (http://go.microsoft.com/fwlink/?LinkId=92706 ).
I applied that fix prescribed in the article but it didn't seem to help, so I'm guessing that is not the issue either. · actions · 2006-Jan-30 6:04 pm · mjn
x 4 Mike Pastore We received this event along with event 40960, 40961, and 1219 in the application log. Any errors in the server's event log? · actions · 2006-Jan-28 11:40 pm · mjnPremium Memberjoin:2000-08-06Cape Coral, FL
How does Windows determine user names? I've seen replication take up to half an hour depending on health of the domain and the quality of the copper between sites. Syntax and command output will be C:\>netstat -aon Active Connections Proto Local Address Foreign Address State PID More In my case, this was happening for roaming notebook users when they were not connected to the domain in the office.
In another post: "Apparently, the user of this machine configured his TCP/IP settings with static addresses and did not include the proper IP address of the domain controller for his DNS With this registry key set to 2 only administrators can log on to the DC. We therefore had no indication that the crash on audit fail registry key had been set to 2. Finally, I found a computer that joined to the domain with a "_" character in the name.
The user policy is being applied happily enough, but the computer policy seems to be trying to be got from the old domain that existed previously.I tried removing the machine from See ME277741 for details on how to do that. http://www.symantec.com/business/support/index?page=content&id=TECH157521MaxUserPort and TcpTimedWaitDelay values can be optimized. "netstat -n" command allow to see number of connections opened and to set appropriate value to MaxUserPort. Return value (1317)", on Windows 2000 servers, and event ID 1053 (Userenv) with message "Windows cannot determine the user or computer name. (The specified user does not exist).
I'm stumped!Thanks,Mike · actions · 2006-Jan-28 10:34 pm · BillRolandPremium Memberjoin:2001-01-21Ocala, FL BillRoland Premium Member 2006-Jan-28 11:01 pm I'm sure you already tried this, but just in case,»www.eventid.net/display. ··· &phase=1 ·